New Tires Still Need Proper Installation.
Tire installation involves more than simply placing a new tire on a wheel.
The tire must be mounted without damaging the bead or wheel, seated correctly, inflated to the proper pressure and balanced as a complete wheel-and-tire assembly.
Directional tires, staggered fitments and TPMS-equipped vehicles can also require additional attention during installation.
At Nutley Street Service Center, we install replacement tires with the vehicle's fitment and operating requirements in mind.
Proper Installation Helps New Tires Perform the Way They Should.
Even the right tire can develop vibration, pressure loss or poor wear if installation is incomplete or incorrect.
Correct Bead Seating
The tire bead must seat evenly against the wheel so the assembly can maintain pressure properly.
Wheel Balance
Proper balancing helps reduce vibration caused by uneven weight distribution in the tire-and-wheel assembly.
Correct Inflation
New tires should be set to the vehicle manufacturer's recommended cold inflation pressure.
Proper Fitment
Directional tread, staggered sizes and vehicle-specific tire positions must be respected during installation.
Tire Installation Is Needed When New Tires Are Ready to Go On the Vehicle.
Professional installation helps ensure the new tire and wheel assembly are prepared correctly before returning to the road.
How We Approach Tire Installation
Correct tire fitment and wheel condition are checked before the vehicle leaves the service bay.
Confirm Tire Fitment
Tire size, load rating, speed rating and applicable directional or staggered requirements are reviewed before installation.
Remove the Existing Tire
The old tire is removed and the wheel, bead-seating area and valve components are visually checked.
Mount & Balance the New Tire
The new tire is mounted, seated and balanced as a complete assembly to help minimize vibration.
Install & Verify
The assembly is installed on the vehicle, tire pressure is set and applicable TPMS operation is reviewed.
Complete Tire Installation Includes Several Important Steps.
Tire Mounting
Remove the existing tire and properly mount the replacement onto the wheel.
Correct tire-to-wheel installationWheel Balancing
Balance the complete tire-and-wheel assembly to help reduce vibration during normal driving.
Smooth highway operationPressure & TPMS Check
Set tire pressure to vehicle specifications and consider TPMS sensor condition and operation where applicable.
Inflation & monitoringEvery New Tire Should Be Balanced With Its Wheel.
Tires and wheels are not perfectly uniform in weight around their circumference.
During balancing, the complete assembly is measured and small corrective weights are positioned on the wheel to reduce imbalance.
An improperly balanced assembly can create vibration that becomes more noticeable at certain road speeds.
Tire Installation Also Involves The Components That Hold and Monitor Air.
Valve Stems
Traditional rubber or metal valve components should remain properly sealed so the tire can retain pressure.
TPMS Sensors
Many vehicles use sensors mounted inside the wheel to monitor tire pressure.
Sensor Service Kits
Depending on sensor design and condition, seals or other service components may require attention during tire installation.
Warning-Light Check
A TPMS warning that remains after proper inflation may require additional sensor or system diagnosis.
Some Tires Must Be Installed In a Specific Position or Direction.
Directional tires use tread designed to rotate in a particular direction and should be installed accordingly.
Some vehicles also use wider tires or wheels on the rear than the front, creating a staggered fitment.
Tire size, rotation direction and axle position should be confirmed before the wheel is installed on the vehicle.
A New Tire Cannot Fix A Damaged Wheel.
Bent, cracked, corroded or damaged wheels can contribute to vibration, poor sealing or repeated pressure loss.
The wheel and bead area can be visually evaluated while the old tire is removed.
If the wheel itself is contributing to the concern, that should be addressed rather than assuming the new tire will solve it.
Installing New Tires Does Not Correct Wheel Alignment.
Mounting and balancing prepare the tire and wheel assembly. Alignment adjusts the angles of the wheels relative to the vehicle.
If the previous tires showed edge wear, feathering, pulling or other abnormal patterns, an alignment check may be appropriate after installation.
Correcting the cause of uneven wear can help protect the new tires.
New Tires Should Feel Smooth and Predictable.
After installation, unusual vibration, persistent pressure loss or a TPMS warning should not simply be ignored.
Vibration may point toward balance or wheel concerns, while pressure loss may involve a valve, bead seal or tire problem.
If something does not feel right after tire installation, the assembly should be rechecked.
Install the New Tire The Right Way From the Start.
Tire installation affects more than whether the tire stays on the wheel. Proper fitment, balance, inflation and monitoring all matter.
Our technicians install the complete assembly with attention to tire specifications, wheel condition and the vehicle's setup.
Common Tire Installation Questions
Yes. The tire-and-wheel assembly should be balanced after a new tire is mounted to help reduce vibration during driving.
TPMS-equipped wheels require care during mounting. Tire pressure and basic system operation can be checked, while failed sensors or persistent warning lights may require separate diagnosis.
Tire or wheel imbalance is one possible cause. Wheel damage, tire irregularities and other vehicle conditions can also create vibration and should be checked if the symptom continues.
Not automatically, but alignment is worth checking when the old tires showed abnormal wear, the vehicle pulls, or the steering wheel is off-center.
Tire Installation Connects With Complete Tire Care.
Get Them Mounted, Balanced And Installed Correctly.
Schedule professional tire installation with Nutley Street Service Center in Fairfax.
3-Year Warranty
AAA Customers
CARFAX Car Care
Service Records